[2018-01-25]The function introduction of three screw granulator

The three screw pelletizer has better shunting effect and more times of shearing, so it has better distribution mixing and dispersion mixing. When the high conc...

[2018-01-25]How to look at the future development of the three screw extruder

China's modified material industry will soon face industrial transformation. The low-end low price and low level competitive material system will gradually ...

[2018-01-25]Structural features of three screw granulator

1. Structural characteristics of three screw extruders (enterprise view)1. the three screws are arranged on the equilateral triangle, rotating in the same direc...

[2018-01-25]General failure of three screw extruder and its elimination method

The current instability of the main engine of the one and three screw extruders1. The cause of production:(1) inhomogeneous feeding(2) damage or poor lubricatio...

[2018-01-25]Instructions for the use of three screw extruder

1) preparation of equipment use instructions1, whether the electrical wiring is accurate, whether there is any loosening phenomenon.2. The motor must be measure...

[2018-01-25]The difference between a single screw granulator and a twin screw granulation machine

The difference of a concept1. The main cylinder of single screw pelletizer adopts electric heating and water cooling to control the barrel temperature automatic...

[2018-01-25]Several points for attention in selecting plastic pelletizer

First, identify the types and output of plastics that are mainly granulated.This is the most important step. Don't get into a mistake. You want a plastic gr...

[2018-01-25]Summary of screw knowledge parameters of twin screw granulator

1. Several important geometric parameters of the screw1, screw diameter (D)A is related to the amount of injection required: ejection volume =1/4* PI *D2*S (fir...

[2018-01-25]Three screw extruder granulation machine granulator appear black spots how to do

What about the black spot of the three screw granulator granulation? In the process of pumping, it is a common problem to meet the black spots of the particles,...

[2018-01-25]The principle and fault maintenance of the granulator

After the plastic is added to the hopper, the hopper falls smoothly on the screw, and is bitten by the screw thread. As the screw is rotated by the screw, the s...

[2018-01-25]How to do the high temperature of the waste plastic granulator at work

(1) precautions for the use of plastic granulator for plastic machine1. General Notices of plastic granulator: 1, to be positive operation; avoid reversing. 2, ...

[2016-12-08]What do you need to pay attention to when using the three screw pelletizer

Below, three screw pelletizer manufacturers to give you a brief introduction about the use of three screw pelletizer what need to pay attention to?1, the main m...

[2016-12-08]What are the advantages of the three screw pelletizer

Next, the three screw pelletizer manufacturers to give you a brief introduction of the three screw pelletizer what are the main advantages?1, reduce production ...