[2018-01-25]Instructions for the use of three screw extruder

1) preparation of equipment use instructions1, whether the electrical wiring is accurate, whether there is any loosening phenomenon.2. The motor must be measure...

[2018-01-25]The difference between a single screw granulator and a twin screw granulation machine

The difference of a concept1. The main cylinder of single screw pelletizer adopts electric heating and water cooling to control the barrel temperature automatic...

[2018-01-25]Several points for attention in selecting plastic pelletizer

First, identify the types and output of plastics that are mainly granulated.This is the most important step. Don't get into a mistake. You want a plastic gr...

[2018-01-25]Summary of screw knowledge parameters of twin screw granulator

1. Several important geometric parameters of the screw1, screw diameter (D)A is related to the amount of injection required: ejection volume =1/4* PI *D2*S (fir...

[2018-01-25]Three screw extruder granulation machine granulator appear black spots how to do

What about the black spot of the three screw granulator granulation? In the process of pumping, it is a common problem to meet the black spots of the particles,...

[2018-01-25]The principle and fault maintenance of the granulator

After the plastic is added to the hopper, the hopper falls smoothly on the screw, and is bitten by the screw thread. As the screw is rotated by the screw, the s...

[2018-01-25]How to do the high temperature of the waste plastic granulator at work

(1) precautions for the use of plastic granulator for plastic machine1. General Notices of plastic granulator: 1, to be positive operation; avoid reversing. 2, ...

[2016-11-28]The advantages and disadvantages of the three screw extruder to the twin screw extruder

The main advantages of the three screw extruder are complex flow field, long residence time and good mixing performance. It has been proved in the practice of m...

[2016-03-14]Tell you about the advantages of the three screw extruder. Don't be surprised!

How to use the shorter time to get the maximum benefit is a topic constantly explored by productive enterprises. Driven by the demand of the times, machinery ma...

[2015-12-15]Honey refining and dispersing function of three screw extruder

People's idea of three screw extruders has been at least a few decades ago, until the first inverted plastic three screw extruder in August 2005 broke throu...