What are the advantages of the three screw pelletizer

Next, the three screw pelletizer manufacturers to give you a brief introduction of the three screw pelletizer what are the main advantages?

1, reduce production cost

When making the masterbatch, it is often necessary to replace the color. If it is necessary to replace the product, open the open processing area in a few minutes, and to analyze the mixing process by observing the melt section on the whole screw. At present, the ordinary three screw pelletizer needs to use a large amount of cleaning material to clean the machine when replacing the color. It wastes time and electricity and wastes raw materials. And the split type three screw granulator can solve this problem, when changing the color, only a few minutes time can quickly open the machine and carry out manual cleaning, so that the cost can be saved without or less use of the cleaning material.

2. A visual understanding of wear and tear of vulnerable parts

Because the opening is convenient, the wear degree of the screw element and the inner liner of the barrel can be found at any time, thereby effective maintenance or replacement can be carried out. It will not be found in the extrusion of products, resulting in unnecessary waste.

3, improve labor efficiency

In the maintenance of equipment, the ordinary three screw pelletizer often dismantling the heating and cooling system first, then the whole screw is drawn out. And the split type three screw is not needed, as long as a few bolts are loosened and the handle device of the worm box is turned up to open the whole cylinder and then be repaired. This not only shortens the maintenance time, but also reduces the labor intensity.

4. High torque and high speed

At present, the development trend of the three screw pelletizer in the world is developing towards high torque, high speed and low energy consumption. The effect of high speed is high productivity. The split three screw pelletizer belongs to this category, and its rotational speed can be increased by 500 rpm. Therefore, it has unique advantages in processing high viscosity and heat sensitive materials.

5. High yield, high quality and high efficiency

With the other advantages of the ordinary three screw pelletizer, it can achieve high yield, high quality and high efficiency.

6. A wide range of applications

It has wide application and can be applied to many kinds of materials.