- The function introduction of three screw granulator
- How to look at the future development of the three screw extruder
- Structural features of three screw granulator
- General failure of three screw extruder and its elimination method
- Instructions for the use of three screw extruder
- The difference between a single screw granulator and a twin screw granulation machine
- Several points for attention in selecting plastic pelletizer
- Summary of screw knowledge parameters of twin screw granulator
- Three screw extruder granulation machine granulator appear black spots how to do
- The principle and fault maintenance of the granulator
- How to do the high temperature of the waste plastic granulator at work
- What do you need to pay attention to when using the three screw pelletizer
Shijiazhuang Xi Rong Machinery Co., Ltd.
地址:Shijiazhuang City West Development Zone of Wuji County
传真:0311-86504778
手机:13102889793
联系人:Manager Wang
邮箱:wlh88888888@163.com
What do you need to pay attention to when using the three screw pelletizer?
Below, three screw pelletizer manufacturers to give you a brief introduction about the use of three screw pelletizer what need to pay attention to?
1, the main motor and the oil pump motor have electric interlock, that is, the motor of the oil pump does not start, the main motor can not start, the main motor does not stop, and the oil pump motor can not stop.
2, when the head pressure exceeds the set alarm value, the material pressure alarm signal lights up and automatically stops.
3, the main motor and feed motor have electrical chain, that is, the main motor does not start, the feeding motor can not start; the main motor of the feeding motor does not stop, the main motor can not stop. The main motor control cabinet has over current protection and has been set before the factory. In addition, it also has a mechanical protection device, usually a nylon shear pin type safety coupling. When the torque is exceeded, the shear pin is cut off and the gearbox stops working.
4, the twin screw is controlled by frequency conversion, AC motor drive or DC speed regulation, DC motor drive. The deceleration and twin screw transmission are in the same box and compact in size. The safety couplings equipped with shear pins can protect the screw and transmission box from damage due to overload.